Sennheiser HSL-10 Instruction Manual

HSL 10 Handset Lifter Instruction ManualBedienungsanleitungNotice d’emploiIstruzioni per l’usoInstrucciones de usoGebruiksaanwijzingBetjeningsvejledn

If problems occur… Problem Possible reason Remedial measures When pressing the hook button on the mobile device or base station, you do not hear a d

Further information In case of further questions, please contact your vendor or, alternatively, your local Sennheiser representative. For more informa

Specifications Overall unit: Dimensions 77 × 110 × 42 cm Weight 80 g Temperature range −5 to +40 °C Power source 6 V DC via base station Max. lifti

13

14

English ... 3 Deutsch ... 15 Français ...

HSL 10 handset lifter instruction manual Safety information... 4 Related documents...

Safety information Disclaimer • Never disassemble or modify the HSL 10. If the housing is opened by customers in breach of this instruction, the warr

Service description The HSL 10 handset lifter completes wireless systems like BW 900 and DW 800 from Sennheiser. HSL 10 automatically picks up the han

Operating elements  P2 button  P1 button  LED  Modular socket  Microphone socket  Lifting pad 1  Adhesive mounting tape  Microphone fastening

 Always make sure not to cover the hole of the microphone  with the double-sided adhesive tape. 2c  Connect the jack plug of the microphone to the

Adjusting the lifting height  Press and hold down for two seconds both the “P2” button  and the “P1” button . The LED  alternately flashes red an

Teaching ring tone 2:  Record ring tone 2 in the same way as described for ring 1, but press the “P2” button  until the LED  flashes red. The LED