Sennheiser 502875 User Manual

RS 180Digital Wireless SystemInstruction manual

9Product overviewIndicators on the transmitterAcoustic signal of the headphonesIndicator Status MeaningCHARGE LED 햲 The rechargeable batteries are bei

Product overview10Overview of the connection stagesConnection establishmentEnrollment mode When you switch the headphones and the transmitter on, the

11Putting the RS 180 into operationPutting the RS 180 into operationSetting up the transmitter왘 Choose a suitable place near your sound source (e.g. T

Putting the RS 180 into operation12Connecting the transmitter to a sound sourceYou can connect the TR 180 transmitter to different sound sources, such

13Putting the RS 180 into operationConnecting the transmitter to a headphone socketDepending on your sound source, you have to change the setting of t

Putting the RS 180 into operation14Connecting the transmitter to RCA sockets (output)Depending on your sound source, you have to change the setting of

15Putting the RS 180 into operationIntegrating the transmitter into an existing connection between devicesTo integrate the transmitter into an existin

Putting the RS 180 into operation16Connecting the transmitter to the mains왘 Select the suitable country adapter 헀 for your wall socket.왘 Slide the cou

17Putting the RS 180 into operationInserting and changing the rechargeable batteriesFor powering the headphones, you can use:• standard batteries (AAA

Putting the RS 180 into operation18Charging the headphones’ rechargeable batteriesCharge the rechargeable batteries for at least 16 hours prior to fir

1ContentsContentsImportant safety information ... 2The RS 180 digital RF head

19Using the RS 180Using the RS 180To switch the product on and to listen to your sound source, proceed asfollows:Switching the transmitter on and offS

Using the RS 18020Switching the transmitter off왘 Press the multi-function button 햴 for approx. 1 second. The multi-function button 햴 goes off. The tra

21Using the RS 180Switching the headphones on and offSwitching the headphones on왘 Press the multi-function button 쐂 for approx. 1 second. The headphon

Using the RS 18022Adjusting the volume on the headphones왘 Press the VOLUME – button 쐆 or the VOLUME + button 쐄 repeatedlyuntil the volume is adjusted

23Using the RS 180Adjusting the sound of the RS 180 to your needsAdjusting the balanceThe balance buttons allow for left/right volume adjustment. Adju

Using the RS 18024Enhancing the speech intelligibilityThe speech intelligibility can be enhanced by activating a dynamiccompression system (Automatic

25Using the RS 180Associating the headphones to the transmitterThe headphones and the transmitter are already associated upon delivery.You only have t

Using the RS 18026왘 Simultaneously press the multi-function button 햴 of thetransmitter and the multi-function button 쐂 of the headphones for7seconds.

27Using the RS 180Associating other Kleer compatible headphones to the transmitterThe following describes how to associate the Sennheiser MX W1earphon

Using the RS 18028Listening with several headphones simultaneouslyBy default, the transmitter is set to single-user operation. In order to beable to l

Important safety information2Important safety information• Please read this instruction manual carefully and completely beforeusing the product.• Make

29Cleaning the RS 180Cleaning the RS 180왘 Before cleaning, switch the product off and disconnect the transmitterfrom the mains.왘 Only use a dry and so

If a problem occurs ...30If a problem occurs ...Sound problemsProblem Possible cause Possible solutions PageNo sound Transmitter is/headphones are swi

31If a problem occurs ...Other problemsIf a problem occurs that is not listed in the above table or if the problemcannot be solved with the proposed s

Accessories and spare parts32Accessories and spare partsOnly use original Sennheiser accessories and spare parts, otherwise theproduct quality can be

33SpecificationsSpecificationsRS 180 systemModulation MSK digitalCarrier frequencies 2.4 – 2.48 GHzRange approx. 100 m in the open areaAmbient tempera

Manufacturer declarations34Manufacturer declarationsWarrantySennheiser GmbH & Co. KG gives a warranty of 24 months on this product.For the current

35Manufacturer declarationsStatements regarding FCC and Industry CanadaThis device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry

Manufacturer declarations36In compliance with:TrademarksThe Kleer logo is a trademark of Kleer Inc.About ENERGY STARENERGY STAR is a joint program of

Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germany moc.resiehnnes.wwwPubl. 08/0910A

3Important safety informationReplacement partsWhen replacement parts are required, be sure the service technician usesreplacement parts specified by S

The RS 180 digital RF headphone system4The RS 180 digital RF headphone systemThe RS 180 is an RF stereo hi-fi headphone system with comprehensivetechn

5Delivery includesDelivery includes1 HDR 180 headphones1 TR 180 transmitter1 power supply unit with country adapters1 stereo audio cable with 3.5 mm j

Product overview6Product overviewOverview of the HDR 180 headphones쐃 Headband 쐄 VOLUME + button 쐇 Charging contacts 쐂 Multi-function button쐋 Ear pads

7Product overviewOverview of the TR 180 transmitter햲 CHARGE LED, orange햳 ALC button, backlit in green햴 Multi-function button , backlit in green햵 Charg

Product overview8Overview of the indicators and acoustic signalsMeaning of the pictograms for the different LEDsIndicators on the headphonesStatus Mea