Sennheiser EW 300 IEM G2 - ANNEXE 141 User's Guide download pdf (Page 26)

Allocating frequencies for a microphone system without a

frequency preset scan

Note:

When you allocate frequencies without a frequency preset scan, inter-

ference with transmitters in the vicinity of the system may result.

Allocating frequencies to rack-mount receivers

You can allocate frequencies automatically or manually.

y Automatic allocation:

If you have connected more receivers from one frequency range than

free channels are available in one channel bank, the WSM re-assigns

the last frequency assigned several times.

y Manual allocation:

You can assign the same frequency to several receivers.

Configuring devices

You can configure the devices using the “Properties” window.

Before you can change parameters, you must activate the “Remote

Active” menu item:

왘 Click on “System” > “Remote Access”.

A tick appears in front of the menu item.

When you call up the “Properties” window (see next section), “Remote

Active” is displayed in the lower part of the window.

Displaying an overview of parameters

To display the parameters of a device:

왘 Double-click on a device In the system window (“Devices” tab) or on the

corresponding panel in the display area.

The “Properties” window opens.

The parameters for the device appear In the left column (“Name”). To the

right, the associated values (“Value”) and units (“Units”).

“Properties” window of a

wireless microphone system

“Properties” window of a

wireless monitoring system

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Sennheiser EW 300 IEM G2 - ANNEXE 141 User's Guide Page 26