6
Configuring the network
To enable communication between the WSM and the NET 1, configure the
network (LAN connections) as follows:
Note:
Only launch the WSM after having configured the network.
Automatically obtaining an IP address (DHCP servers only)
왘 In the “Internet Protocol (TCP/IP) Properties” dialog box, click on the
“Obtain an IP address automatically” option button.
왘 Click on “OK”.
The dialog box closes. The configuration of the network is terminated.
Manually entering an IP address
If the “IP address” field is empty:
왘 In the “IP address” field, enter the following addresses:
왘 Click on “OK”.
The dialog box closes. The configuration of the network is terminated.
If the “IP address” field displays an IP address that does not start with
169.254. :
왘 Click on “Advanced...”
왘 In the “IP address” field, enter the following addresses:
왘 Click on “OK”. The IP address is added.
The dialog box closes. The configuration of the network is terminated.
Launching the WSM PC software
Note:
Before you launch the WSM software, you must switch on all rack-
mount devices and the NET 1.
To launch the WSM PC software:
왘 Double-click on the program icon on the desktop or click on “Start” >
“Programs” > “Wireless Systems Manager”.
This launches the WSM software and the main window appears.
IP address Subnet mask
169.254.XXX.XXX
(XXX = any arbitrary number from 1 to 254)
255.255.0.0
IP address Subnet mask
169.254.XXX.XXX
(XXX = any arbitrary number from 1 to 254)
255.255.0.0
Comments to this Manuals