Sennheiser 2015 User Manual download pdf (Page 18)

Connecting audio sources to the transmitter

You can connect audio sources such as a CD player, a television, or the sound

card of a computer to the line input of the transmitter.



Connect the 3.5 mm jack plug of the connecting cable to the transmit-

ter’s 3.5 mm jack socket (LINE)





Via the operating menu, adjust the sensitivity of the line input (see

“Adjusting the sensitivity of the line input“ on page 82).

Note:

If the transmitter is preset so that the line input is switched off, the dis-

play for line level is not shown on the display panel.

Connecting the receiver to hearing aids or headphones

Connecting the receiver to hearing aids with direct audio input



Connect a hearing aid with direct audio input to the receiver’s 2.5 mm

jack socket (LOW)



. Suitable connecting cables (see “System variants

and accessories“ on page 103) are available from your Sennheiser dea-

ler.

Connecting the receiver to a hearing aid without audio input

(hearing aid must have Telecoil)



Connect the EZT 2015 induction neck loop or the EZI 120 induction

couplers for hearing aids without audio input to the receiver’s 3.5 mm

jack socket (HI)



. Suitable connecting cables for the induction coup-

lers (see “System variants and accessories“ on page 103) are available

from your Sennheiser dealer.

Connecting the headphones

You must only connect headphones with a stereo jack plug and a minimum

impedance of 32

to the receiver (see “Connector assignment“ on

page 102).



Connect the headphones to the receiver’s 3.5 mm jack socket (HI)



 

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 60 61

No comments

Sennheiser 2015 User Manual Page 18