Sennheiser 2015 User Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 61
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
84
Troubleshooting
Error checklist
Problem Possible cause Possible solution
No display on the
display panel
Battery pack or batteries at low
capacity.
Recharge the battery pack or
replace the batteries.
Receiver: No RF signal Transmitter and receiver are not
on the same channel/frequency.
Set transmitter and receiver to the same
channel. Check if the frequency is the
same. If this is not the case, set
transmitter and receiver to a different
channel.
The transmitter is out of range. Reduce the distance between
transmitter and receiver.
The technical expert must check the
squelch threshold setting.
Receiver: RF signal
available,
but no audio signal
The transmitter’s microphone is
muted (“MUTE”).
Deactivate the muting function.
Microphone signal has
a high level of
background noise
The transmitter’s microphone
sensitivity is adjusted too low.
Via the “SENSIT (MIC)” menu, increase
the microphone sensitivity.
Line signal has a high
level of background
noise
The transmitter’s line sensitivity is
adjusted too low.
Via the “SENSIT (LINE)” menu, increase
the line sensitivity.
The transmitter’s microphone signal
interferes with the line signal.
Mute the transmitter’s microphone
(“MUTE”).
Microphone signal is
distorted
The transmitter’s microphone
sensitivity is adjusted too high.
Via the “SENSIT (MIC) menu, reduce the
microphone sensitivity.
Line signal is distorted The transmitter’s line sensitivity is
adjusted too high.
Via the “SENSIT (LINE)” menu, reduce
the line sensitivity.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 60 61

Comments to this Manuals

No comments