Sennheiser EMP 2015 Instruction Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
56
EMP 2015 with three transmitters and
two additional receivers
Installing a system including several transmitters
(team teaching)
With one Soundfield System, up to three speakers can speak simultaneously
in the same room.
Transmitter 1 is directly received by the receiver section of the EMP 2015.
Transmitters 2 and 3 require an additional receiver respectively. The receivers
can be connected to the RCA sockets (LINE IN) of the EMP 2015. The
signals of all transmitters are then reproduced by the loudspeakers.
For installing the system described above, you require additional SK 500
bodypack transmitters and EM 500 rack-mount receivers (“Recommended
accessories”).
Connecting an EM 500 receiver
For connecting an EM 500 receiver, you require a connecting cable fitted
with an 1/4” (6.3 mm) jack plug and an RCA plug ( “Recommended
accessories”).
Prepare the receiver for use as described in the receiver’s instruction
manual.
Connect the RCA plug of the connecting cable to one of the two RCA
sockets (LINE IN) of the EMP 2015.
Connect the 1/4” (6.3 mm) jack plug of the connecting cable to the
1/4” (6.3 mm) jack socket of the receiver.
Set the transmitter and receiver of each transmission link to the same
frequency.
Note:
Transmitter and receiver of each transmission link have to operate on the
same frequency which must differ from the frequencies used by other
transmission links in the room. With both the transmitter and receiver of the
Soundfield System and the additional SK 500 transmitters and
EM 500 receivers you can change the frequencies and store them in one of
the 16 fixed frequency memories ( “Operating steps for configuring a
frequency memory”).
Adjusting the volume of the connected receivers
Use the volume control (LINE IN) to adjust the volume of the
connected receiver.
Note:
If you have connected two receivers to the line input, the volume control
adjusts the volume of both receivers.
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Comments to this Manuals

No comments