Sennheiser SR 2050 IEM User Manual

SR 2050 IEMSR 2000 IEMInstruction manual

Putting the transmitter into operation9Connecting and positioning a remote antennaUse a remote antenna when the transmitter position is not the best a

Putting the transmitter into operation10왘 Guide the BNC connector of the BNC extension cable through the hole in the rack mount“ear” .왘 Connect the

Putting the transmitter into operation11Connecting an audio source to the input sockets왘 Use a suitable cable to connect the output of the audio sourc

Putting the transmitter into operation12Connecting devices to the output sockets왘 Use a suitable cable to connect the audio input of a device (e.g. a

Using the transmitter13Using the transmitterTo establish a transmission link, proceed as follows:1. Switch the transmitter on (see below).2. Switch th

Using the transmitter14Deactivating the lock mode temporarilyYou can activate or deactivate the automatic lock mode via the “Auto Lock” menu item. If

Using the transmitter15Monitoring the audio signal via headphonesYou can monitor the audio signal via the headphone output . 왘 Set the headphone volu

Using the transmitter16When carrying out the Sync function, the transmitter’s current frequency bank andchannel setting as well as the receiver parame

Using the transmitter17왘 Place the infra-red interface of the diver-sity receiver in front of the infra-redinterfaces of the remaining transmitters,on

Using the operating menu18Using the operating menuThe buttonsOverview of the operating menuButton Function of the buttonPress the STANDBY button• Swit

Contents1ContentsImportant safety instructions ...

Using the operating menu19When the standard display is shown on the display panel, you can get into the main menu bypressing the jog dial. The extende

Using the operating menu20Working with the operating menuBy way of example of the “Frequency Preset” menu, this section describes how to use theoperat

Using the operating menu21Canceling an entryTo return to the last edited menu item:Exiting a menu itemTo directly return to the standard display: 왘 Pr

Synchronizing the transmitter with an EK 2000 IEM receiver22Synchronizing the transmitter with an EK 2000 IEM receiverWhen synchronizing your transmit

Cleaning the transmitter23Using freely selectable transmission frequenciesYou can also freely select the frequencies and store these frequencies in th

If a problem occurs ...24If a problem occurs ...If a problem occurs that is not listed in the above table or if the problem cannot be solved withthe p

Specifications25SpecificationsRF characteristicsAF characteristicsOverall deviceIn compliance withFrequency ranges 516–558, 558–626, 626–698, 718–790,

Manufacturer Declarations26Approved byConnector assignmentManufacturer DeclarationsWarrantySennheiser electronic GmbH & Co. KG gives a warranty of

Manufacturer Declarations27Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industr

Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germanywww.sennheiser.comPrinted in GermanyPubl. 01/09529682/A01

Important safety instructions2Important safety instructions1. Read these instructions.2. Keep these instructions. Always include these instructions wh

Important safety instructions3This symbol is intended to alert the user to the risk of electric shock if the transmitter isopened. There are no user s

The SR 2000 IEM and SR 2050 IEM transmitters4The SR 2000 IEM and SR 2050 IEM transmittersWith the SR 2000 IEM and SR 2050 IEM 2-channel/stereo monitor

Delivery includes5Each of the channels in the frequency banks “1” to “20” has been factory-preset to a fixedtransmission frequency (frequency preset).

Product overview6Product overviewOverview of the SR 2000 IEM/SR 2050 IEM transmitterThe SR 2050 IEM twin transmitter has the same operating elements a

Product overview7Overview of the displaysAfter switch-on, the transmitter displays the standard display.Display Meaning Audio level“AF I” and “AF II”

Putting the transmitter into operation8Putting the transmitter into operationSetting up the transmitter on a flat surface왘 Clean the base of the trans