Sennheiser EM 300 G3 Instruction Manual

SK 300Instruction manual

8Putting the bodypack transmitter into operationPutting the bodypack transmitter into operationInserting the batteries/accupackFor powering the bodypa

9Putting the bodypack transmitter into operationAttaching and positioning the microphonesME 2왘 Use the microphone clip 씍 to attach the microphone to c

10Putting the bodypack transmitter into operationAttaching the bodypack transmitter to clothingYou can use the belt clip 씎 to attach the bodypack tran

11Using the bodypack transmitterUsing the bodypack transmitterTo establish a transmission link, proceed as follows:1. Switch the receiver on (see the

12Using the bodypack transmitterTo activate the RF signal:Deactivating the lock mode temporarilyYou can activate or deactivate the automatic lock mode

13Using the bodypack transmitter왘 Slide the MUTE switch 쐇 to the left, to the position MUTE.The bodypack transmitter reacts as indicated in the table.

14Using the operating menuUsing the operating menuThe buttonsOverview of the operating menuButton Function of the buttonPress the ON/OFF button• Switc

15Using the operating menuWorking with the operating menuBy way of example of the “Sensitivity” menu, this section describes how touse the operating m

16Using the operating menuCanceling an entryTo return to the last edited menu item:Exiting a menu itemTo return to the next higher menu level:To direc

17Adjusting settings via the operating menuAdjusting settings via the operating menuThe main menu “Menu”Adjusting the input sensitivity – “Sensitivity

18Adjusting settings via the operating menuOverview of the frequency banks and channels:When setting up multi-channel systems, please observe the foll

19Adjusting settings via the operating menuThe extended menu “Advanced Menu”Setting transmission frequencies and frequency banks – “Tune”When you have

20Adjusting settings via the operating menuSetting the mode for the MUTE switch and the RMS 1 external mute switch – “Mute Mode”The “Push to mute” and

21Adjusting settings via the operating menuAdjusting the transmission power – “RF Power”Via the “RF Power” menu item, you can adjust the transmission

22Adjustment tipsAdjustment tipsSynchronizing the bodypack transmitter with a receiverWhen synchronizing the bodypack transmitter with a receiver, ple

23If a problem occurs ...If a problem occurs ...If a problem occurs that is not listed in the above table or if the problemcannot be solved with the p

24SpecificationsSpecificationsIn compliance withRF characteristicsModulation wideband FMFrequency ranges 516–558, 566–608, 626–668, 734–776, 780–822,

25SpecificationsApproved byMicrophonesConnector assignment3.5 mm jack plugPolar diagrams and frequency response curves of the microphonesCanada Indust

26Manufacturer DeclarationsManufacturer DeclarationsWarrantySennheiser electronic GmbH & Co. KG gives a warranty of 24 months on thisproduct.For t

27Manufacturer DeclarationsStatements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry

1ContentsContentsImportant safety instructions ...2The SK 300 G3 bodypack tra

Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germanywww.sennheiser.comPrinted in GermanyPubl. 01/09529670/A01

2Important safety instructionsImportant safety instructions• Read this instruction manual.• Keep this instruction manual. Always include this instruct

3The SK 300 G3 bodypack transmitterThe SK 300 G3 bodypack transmitterThe SK 300 G3 bodypack transmitter is part of the evolution wireless seriesgenera

4The SK 300 G3 bodypack transmitterAreas of applicationThe bodypack transmitter can be combined with the EM 300 G3 rack-mount receiver.The EM 300 G3 r

5Delivery includesDelivery includesThe packaging contains the following items:1 SK 300 G3 bodypack transmitter2 AA size batteries, 1.5 V1 instruction

6Product overviewProduct overviewOverview of the SK 300 bodypack transmitter쐃 Microphone/instrument input (MIC/LINE), 3.5 mm jack socket, lockable쐇 MU

7Product overviewOverview of the displaysAfter switch-on, the bodypack transmitter displays the standard display“Frequency/Name”. For further illustra