33Instructions for useSKM 5200SKM 5200_512717_0506_Sp6.book Seite 3 Donnerstag, 7. Dezember 2006 3:28 15
12LC display shown on the example of the BA 5000-1 battery packChanging the microphone headTo change the microphone head of the SKM 5200:Different mic
13Switching the radio microphone on/offNote:y Remove the batteries or the battery pack when the radio mi-crophone will not be used for extended period
14Doing a frequency checkThe radio microphone has a frequency check mode that preventsthat the radio microphone transmits on an unwanted frequencyafte
15The operating menu The buttonsButton Mode FunctionRed button (ON/OFF,ESC)Switched offy Briefly pressing the button:Switching the radio microphone on
16The automatic lock mode (autolock function)The radio microphone has a lock mode that prevents that the radiomicrophone is accidentally programmed wh
17Working with the operating menuThe operating menu has three modes:y Display modeIn display mode, you can display the current menu settings oneafter
18After switch-onAfter switch-on, the standard display is shown on the displaypanel. Depending on the setting, the transmission frequency, thechannel
19The following menus are available:Changing to the setting mode of a selected menuAdjusting a setting Use the multi-function switch to adjust the s
20Storing a settingWith most menus, new settings become effective immediatelywithout having to be stored. An exception are the “TUNE” and“CHAN” menus.
21Overview of the operating menuDeactivate the lock mode before adjusting the settings (see“Deactivating the autolock function temporarily” on page 16
4ContentsSafety instructions ... 5Delivery includes ...
22Display modeSelection modeSetting mode CHSETSETSETSETSETSETAdjusting the low-cut-frequencyCurrent low-cut-frequency 190Hz 120HzSelectin
23Adjustment tips for the operating menuSelecting a channel – CHANVia the “CHAN” menu, you can switch between the channels in thechannel banks “FIX“ a
24There are two options for setting the frequencies:y You can set a new frequency for the selected channel:y You can change to a different channel and
25Entering a name – NAMEVia the “NAME” menu, you can enter a freely selectable name forthe radio microphone. This name can be displayed on the standar
26Microphone sensitivity of the SKM 5200 and the SKM 5000:Adjusting the low-cut frequency – LOWCUTTo reduce unwanted low-frequency noise such as engin
27Activating/deactivating the automatic lock mode – LOCKThe radio microphone has an autolock function (automatic lockmode) that can be activated or de
28If problems occur ...Error checklistIf problems occur that are not listed in the above table or if theproblems cannot be solved with the proposed so
29Tips for optimum receptiony The transmission range depends to a large extent on thelocation and can be up to 150 m. There should be a “free line ofs
30SpecificationsModulation wideband FMFrequency range450–960 MHz Switching bandwidth 36 MHzTransmission frequencies channel bank “FIX” with customer-s
31Accessories003763 ME 5009 microphone head003760 ME 5005 microphone head005249 ME 5005e microphone head003762 ME 5004 microphone head003761 ME 5002 m
5Safety instructionsy Please read these instructions carefully and completely beforeusing the radio microphone.y Make these instructions easily access
32Manufacturer declarationsWarranty regulationsThe guarantee period for this Sennheiser product is 24 months from the dateof purchase. Excluded are ac
SKM 5200_512717_0506_Sp6.book Seite 3 Donnerstag, 7. Dezember 2006 3:28 15
Sennheiser electronic GmbH & Co. KG30900 Wedemark, GermanyPhone +49 (5130) 600 0Fax +49 (5130) 600 300www.sennheiser.comPrinted in Germany Publ. 0
6Intended use of the radio microphoneIntended use includesy having read these instructions especially the chapter “Safetyinstructions”.y using the rad
7y Can be operated either on rechargeable or standard alkalinebatteries – with LC display (in percent) of charging status onsuitable receivers.y HiDyn
8The operating controlsOperating controls LC display panel Screw-on microphone head(not included in the delivery) Body of radio microphone Power pa
9Indications and displaysOperation and battery status indicationThe LED (ON/LOW BAT) provides information on the currentoperating state of the radio
10Preparing the radio microphone for useInserting, removing and changing the power packFor powering the radio microphone, you can either use theSennhe
11Inserting batteries into the B 5000 battery boxTo ensure the longest operating time possible, only use alkalinemanganese batteries for the B 5000 ba
Comments to this Manuals