Sennheiser EK 2000 IEM User Manual

Instruction manualEK 2000 IEMCMYCMMYCYCMYK

9Product overview햷 Battery status Charge status:approx. 100%approx. 70%approx. 30%charge status is critical, the red LOW BATT LED 쐏 is flashing:햸 Muti

10Putting the diversity receiver into operationPutting the diversity receiver into operationInserting the batteries/accupackFor powering the diversity

11Putting the diversity receiver into operationConnecting the earphones왘 Connect the earphones to the socket 쐇.Attaching the diversity receiver to clo

12Putting the diversity receiver into operationTo detach the belt clip:왘 Lift one side of the belt clip as shown.왘 Press down the belt clip at one fix

13Using the diversity receiverUsing the diversity receiverTo establish a transmission link, proceed as follows:1. Switch the diversity receiver on (se

14Using the diversity receiverTo adjust the volume:왘 Turn the volume control 쐃.Deactivating the lock mode temporarilyYou can activate or deactivate th

15Using the diversity receiverSelecting a standard display For more detailed information, refer to the chapter “Overview of thedisplays” on page 8.왘 P

16Using the operating menuUsing the operating menuA special feature of the Sennheiser 2000 series is the consistent, intuitivemenu structure of transm

17Using the operating menuDisplay Function of the menu item PageMain menu “Menu”Squelch Adjusts the squelch threshold 20Easy Setup Scans for unused fr

18Using the operating menuWorking with the operating menuBy way of example of the “Frequency Preset” menu, this section describeshow to use the operat

1ContentsImportant safety instructions ... 2The EK 2000 IEM diversity receiver

19Using the operating menuCanceling an entryTo subsequently return to the last edited menu item:Exiting a menu itemTo return to the next higher menu l

20Adjusting settings via the operating menuAdjusting settings via the operating menuThe main menu “Menu”Adjusting the squelch threshold – “Squelch”Adj

21Adjusting settings via the operating menuIf you have accidentally switched off the squelch:왘 Press the UP rocker button to switch the squelch on.Sca

22Adjusting settings via the operating menuOverview of the frequency banks and channels:Entering a name – “Name”Via the “Name” menu item, you can ente

23Adjusting settings via the operating menuYou can adjust the balance in 31 steps. In Focus mode (see next section)and when one of the standard displa

24Adjusting settings via the operating menuActivating/deactivating the automatic lock mode – “Auto Lock”The lock mode prevents that the balance is acc

25Adjusting settings via the operating menuSelecting a channel and assigning this channel a frequencyIt is vital to observe the notes on frequency sel

26Adjusting settings via the operating menu왘 Set the desired frequency (MHz and kHz section) as described in theprevious chapter.Activating/deactivati

27Adjusting settings via the operating menuYou can adjust the limiter in 6-dB steps from –18 dB to –6 dB or switch itoff (OFF).Adjusting the contrast

28Synchronizing a transmitter with the diversity receiverSynchronizing a transmitter with the diversity receiverSetting the transmitters to intermodul

2Important safety instructionsImportant safety instructions• Read this instruction manual.• Keep this instruction manual. Always include this instruct

29Synchronizing a transmitter with the diversity receiver왘 Start the Easy Setup Sync function by placing the infra-red interface ofthis diversity rece

30Cleaning the diversity receiverUsing freely selectable receiving frequenciesYou can also freely select the receiving frequencies and store thesefreq

31Recommendations and tipsRecommendations and tips... for the diversity receiver• Make sure that the antenna and the earphones cable do not cross.• Fo

32If a problem occurs ...If a problem occurs ...Problem Possible cause Possible solutionDiversity receiver cannot be operated, “Locked” appears on the

33AccessoriesIf a problem occurs that is not listed in the above table or if the problemcannot be solved with the proposed solutions, please contact y

34SpecificationsSpecificationsRF characteristicsAF characteristicsModulation wideband FMFrequency ranges 516–558, 558–626, 626–698, 718–790, 790–865 M

35SpecificationsOverall deviceIn compliance withApproved byConnector assignmentTemperature range –10°C to +55°CPower supply2 AA size batteries, 1.5 V

36Manufacturer DeclarationsManufacturer DeclarationsWarrantySennheiser electronic GmbH & Co. KG gives a warranty of 24 months on thisproduct.For t

37Manufacturer DeclarationsStatements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry

38IndexIndexAccessories 33Accupackcharging 10inserting 10Advanced Menu (extended menu)overview 17settings 24Auto Lock (activating/deactivating the loc

3Important safety instructionsIntended useIntended use of the EK 2000 IEM diversity receiver includes:• having read these instructions especially the

39IndexName (entering a name) 22OOperating menuoverview 16settings 20using 18PPilot Tone (activating/deactivating the pilot tone evaluation) 26RReceiv

Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germanywww.sennheiser.comPrinted in GermanyPubl. 01/09529678/A01CMYCMMYCYCMYK

4The EK 2000 IEM diversity receiverThe EK 2000 IEM diversity receiverThis diversity receiver is part of the 2000 series. With this series,Sennheiser o

5The EK 2000 IEM diversity receiverThese transmitters are available in the same UHF frequency ranges and areequipped with the same frequency bank syst

6Delivery includesThe frequency banks “U1” to “U6” allow you to freely select and storereceiving frequencies. It might be that these receiving frequen

7Product overviewProduct overviewOverview of the EK 2000 IEM diversity receiver쐃 On/off/volume control쐇 Headphone output (PHONES),3.5 mm stereo jack s

8Product overviewOverview of the displaysAfter switch-on, the diversity receiver displays the “Frequency/Name”standard display. For further illustrati