Sennheiser 2020 User Manual download pdf (Page 32)

Using the components

Charging the BA 2015 accupack

To charge the accupack of the wireless microphone or

bodypack transmitter:

 Remove the accupack, as described on page 23 or

page 24.

 Place the accupack into the charging compartment

for the accupack/bodypack transmitter  as

shown in the diagram on the left.

The red LED CHARGE/ERROR  of the charging

compartment lights up.

When the accupack is fully charged, the green LED

READY  lights up.

Notes:

y Charging a completely discharged accupack takes

approx. 3½ hours at room temperature. It is

normal for the accupacks to get hot during

charging.

y However, the charging process may take longer

if:

– the accupack is deep-discharged and first has

to be reconditioned by a deep discharge

recovery charge,

– the ambient temperature is close to or over

40°C, since, in order to protect the accupack, the

charging process will be interrupted until the

temperature has dropped to a safe level.

y For safety reasons, each charging process will be

interrupted after 4 hours.

y When not using the BA 2015 accupack for

extended periods of time, charge it about every

three to six months.



쐋



1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

No comments

Sennheiser 2020 User Manual Page 32