Sennheiser AC 3200 Instruction Manual download pdf (Page 60)

Putting the AC 3200 into operation

Putting the AC 3200 into

operation

Preparing the AC 3200 for use

You can set up the AC 3200 on an even surface or mount it into

a 19" rack.

Setting up the device

To ensure that the AC 3200 cannot slip on the surface on which

it is placed, four self-adhesive soft rubber feet are supplied.

CAUTION! Danger of heat damage to the devices!

During operation, the AC 3200 and the connected

transmitters produce considerable waste heat!

If this heat cannot dissipate, it can cause damage

to the devices!

The devices are equipped with fans to assist

dissipation of generated heat:

왘 Make sure that the air vents 쐇 on the sides of

the AC 3200 are not covered or blocked and

provide ducts of sufficient size or allow

sufficient space to ensure a free air flow

between the devices.

왘 Regularily clean the air vents on the sides of

the AC 3200 with a soft brush.

왘 In order to avoid heat accumulation, make sure

to install the AC 3200 as the uppermost device.

왘 Never stack more than two devices directly one

above the other!

CAUTION! Risk of staining of surfaces!

Some surfaces have been treated with varnish,

polish or synthetics which might cause stains

when they come into contact with other

synthetics. Despite a thorough testing of the

synthetics used by us, we cannot rule out the

possibility of staining.

왘 Do not place the AC 3200 on delicate surfaces.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 68 69

No comments

Sennheiser AC 3200 Instruction Manual Page 60