Sennheiser EK 300 IEM Specifications download pdf (Page 16)

The antenna mounts consist of:

y 2 BNC extension cables (screw-in BNC socket to BNC connector )

y 2 washers

y 2 nuts

y 2 antenna holders (GA 3030 AM only)

y 4 screws (GA 3030 AM only)

To front mount the antenna of the SR 300 IEM G2 transmitter:

 Screw the BNC socket of the BNC extension cables to the blanking plate

 using the supplied washer and nut.

 Connect the BNC connector to the BNC socket  on the transmitter.

 Slide the transmitter into the 19’’ rack.

 Secure the rack mount “ears” to the rack.

 Connect the telescopic antenna to the BNC socket .

 Pull the end cap to extend the telescopic antenna .

To front mount the antennas of the SR 350 IEM G2 twin transmitter:

 Unsecure the rack mount “ears”  from the rack.

 Guide the BNC cables through the holes in the rack mount “ears” as shown

in the diagram on the left.

 Screw the antenna holders to the BNC sockets

using the supplied

washers and nuts.

 Secure the antenna holders to the handles of the twin transmitter using

two of the supplied screws respectively.





ew300_350_IEM_INT.book Seite 14 Freitag, 7. März 2008 8:55 08

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

No comments

Sennheiser EK 300 IEM Specifications Page 16