Sennheiser L 2015 Specifications download pdf (Page 11)

If problems occur...

If a red LED starts flashing, one of the following errors has

occurred at the corresponding charging compartment:

! No contact with the accupack (contacts are dirty or

accupack is not inserted correctly):

Clean the contacts or insert the accupack correctly.

! Accupack is defective (overaged or defective rechargeable

battery cells):

Replace the accupack.

! Accupack temperature is too low or too high:

Always charge the accupack at room temperature.

! Batteries (primary cells) or individual rechargeable batte-

ries have been inserted:

Only charge the BA 2015 accupack!

Care and maintenance

Use a slightly damp cloth to clean the switched-off charger

from time to time. Use a brush or similar to remove dust

from the charging compartments. Do not use any cleansing

agents or solvents.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Sennheiser L 2015 Specifications Page 11