Sennheiser 500621 Datasheet download pdf (Page 25)

Adjusting the microphone sensitivity – ATTEN

Via the “AT TE N ” menu, you can adjust the transmitter’s sensitivity.

Adjusting the bass roll-off frequency – LOWCUT

To reduce unwanted low-frequency noise such as wind and handling noise,

you can activate a low-cut filter. The low-cut frequency is 120

Hz.

If you do not want to reduce low-frequency signal portions, select the set-

ting “FLAT”.

Selecting the standard display – VIEW

Via the “VIEW” menu, you can select one of the following standard displays:

The selected standard display is shown

! after switch-on,

! after the menu settings have been displayed for 10 seconds in display

mode.

The sensitivity is correctly adjusted when the level

display for audio signal “AF”

 shows full

deflection only during the loudest passages or

when the redLED

 lights up brightly.

The sensitivity can be adjusted in 1-dB steps from

40 dB to –30 dB.

No t e:

! The bargraph has a resolution of approx. 3 dB

per segment with a display range of 45 dB.

Transmission

frequency “FREQ”

Channel

“CHAN”

Name

“NAME”





MHz

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

No comments

Sennheiser 500621 Datasheet Page 25