Sennheiser SYSTEM 2015 Specifications download pdf (Page 16)

How to properly use the battery pack or the batteries

For battery pack operation, only use the BA 2015 battery pack in order to

ensure optimum operational reliability. Batteries and rechargeable battery

cells have different discharging curves. Transmitter and receiver are able to

identify the BA 2015 battery pack and to use it to full capacity. They also

adapt the battery status display according to the type of power supply used

(batteries or battery pack). Individual rechargeable battery cells will not be

identified as battery packs.



After use (e.g. during the night), charge the BA 2015 battery pack of

the transmitter or receiver in the L 2015 charger. The maximum char-

ging time is 2.5 hours, at which time the unit then switches to trickle

charging.



If you do not use the transmitter or receiver for extended periods of

time (e.g. while you are on holiday), remove the battery pack or the

batteries. After three months at the latest, the battery packs will need

a refresh charge in the L 2015 charger. This prevents damage to the

battery pack due to self-discharge.

Connecting sound sources to the transmitter

Connecting the microphones to the transmitter

In addition to the supplied MKE 2015-2 clip-on microphone, a plug-on

microphone (MKE 2015-0) and a headset microphone (ME 2015-H) are

available as optional accessories. DC powering of these condenser micro-

phones is via the microphone input.



Connect the 2.5 mm jack plug of the microphone or the microphone

cable to the transmitter’s 2.5 mm jack socket (MIC)





Via the operating menu, adjust the sensitivity of the microphone input

(see “Adjusting the microphone sensitivity“ on page 82).



1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 60 61

No comments

Sennheiser SYSTEM 2015 Specifications Page 16