Sennheiser EM 500 G3 Instruction Manual download pdf (Page 25)

If a problem occurs ...

If a problem occurs that is not listed in the above table or if the problem

cannot be solved with the proposed solutions, please contact your local

Sennheiser partner for assistance.

To find a Sennheiser partner in your country, search at www.sennheiser.com

under “Service & Support”.

Problem Possible cause Possible solution

Bodypack

transmitter

cannot be oper-

ated, “Locked”

appears on the

display panel

Lock mode is activated Deactivate the lock mode

(see page 12)

No operation

indication

Batteries are flat or

accupack is flat

Replace the batteries or

recharge the accupack

(see page 8)

No RF signal at

the receiver

Bodypack transmitter

and receiver are not on

the same channel

Set the bodypack trans-

mitter to the same

channel as the receiver.

Synchronize the body-

pack transmitter with

the receiver.

Bodypack transmitter is

out of range

Check the squelch

threshold setting on

the receiver.

Reduce the distance

between bodypack trans-

mitter and receiving

antenna.

Increase the transmission

power (see page 20)

RF signal is deactivated

(“RF Mute“)

Activate the RF signal

(see page 12)

RF signal

available,

no audio signal,

“MUTE”

appears on the

display panel

Bodypack transmitter is

muted (MUTE)

Cancel the muting

(see page 12).

Receiver’s squelch

threshold is adjusted

too high

Reduce the squelch

threshold setting on

the receiver.

Bodypack transmitter

doesn’t transmit a pilot

tone

Activate or deactivate the

pilot tone transmission

(see page 20).

Audio signal

has a high level

of background

noise / audio

signal is

distorted

Bodypack transmitter’s

sensitivity is adjusted too

low/too high

Adjust the input

sensitivity

(see page 17).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments

Sennheiser EM 500 G3 Instruction Manual Page 25

Comments to this Manuals

Related products and manuals for Guitar accessories Sennheiser EM 500 G3