Sennheiser BW900 Instruction Manual download pdf (Page 14)

Basic settings

Switching the headset on/off

In the office it is not necessary to switch off the headset. If you do not

want to use the headset:

f Simply place the headset in the headset cradle  and set the head-

set/handset switch  to the “up” position.

The headset is deactivated. Your office phone works as usual with the

handset.

To switch off the headset (e.g. when taken away from the base station):

f Press and hold down the headset multi switch  for approx. 4 sec-

onds until the headset LED  flashes red three times to indicate that

the headset is switched off.

Note:

All settings are saved when the headset is switched off.

To switch the headset on, either:

f Place the headset in the headset cradle .

or:

f Press and hold the headset hook button  for approx. 4 seconds until

the headset LED  flashes blue three times to indicate that the head-

set is switched on. Then the headset LED  flashes blue once every

5 seconds to indicate that the headset is in standby mode.

Switching the base station on/off

To switch the base station off:

f Unplug the power supply.













1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

Sennheiser BW900 Instruction Manual Page 14