Sennheiser EM 550 G2 Specifications download pdf (Page 21)

Performing a frequency scan for wireless microphone

systems

The NET 1 selects one rack-mount receiver from each of the frequency ranges

to perform the frequency scan. The frequencies of the selected channel bank

are assigned to the connected receivers of this frequency range.

Subsequently, the frequencies are transferred to the corresponding portable

transmitters.

Note:

When you have connected both monitoring and microphone systems to

the NET 1, you first have to perform the frequency preset scan for the

monitoring system. (see “Performing a frequency scan for wireless

monitoring systems (IEM)” on page 18).

Switching the transmitters on/off

왘 Switch on all rack-mount transmitters (IEM) connected to the NET 1.

왘 Switch off all portable transmitters that are to be configured via the NET 1.

Performing the frequency scan

왘 Press and hold the MODE button  on the NET 1.

The NET 1 selects one rack-mount device from each of the frequency

ranges. The “CHANNEL” LEDs  assigned to these devices light up.

When two NET 1 are daisy-chained, pressing the MODE button 

automatically determines the “master” NET 1. The “REMOTE” LED of the

“slave” NET 1 lights up and its MODE button  is deactivated.

왘 On the NET 1, press the channel button  corresponding to the receiver.

The corresponding “CHANNEL” LED  and the yellow “SCAN” LED 쐋 flash

slowly.

Note:

The results of any prior frequency scan are overwritten.

Example:

The connection groups 1 to 4 of the NET 1 are occupied by transmitters (IEM).

The connection groups 6 to 10 are occupied by rack-mount receivers. After

pressing the MODE button , the green “CHANNEL“ LEDs  for the first rack-

mount transmitter (connection group 1) and the first rack-mount receiver

(connection group 5) light up. The “CHANNEL“ LEDs  of the other rack-

mount devices do not light up, i.e. they belong to the same frequency range.

After pressing the channel button , both the “CHANNEL“ LED  of the rack-

mount receiver and the yellow “SCAN” LED 쐋 flash.









Wireless

monitoring system

Wireless microphone

system

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comments to this Manuals

No comments

Sennheiser EM 550 G2 Specifications Page 21

Comments to this Manuals

Related products and manuals for Headphones Sennheiser EM 550 G2