Sennheiser MM 400-X Operations Instructions download pdf (Page 18)

2/8/2012 18 Retsch GmbH

Setting the frequency

• Set the frequency with + / - buttons M+ and M-.

• Short pressing of + or – adjusts the frequency in single steps.

With longer pressing the display runs faster. Selectable

frequency range is from 3 to 30 Hz.

Starting the milling process

• Shut the hood.

• Set the frequency.

• Set the time.

• The milling operation is started with start button P.

• The milling time is recorded and the milling time still

remaining is shown in display N.

The milling process can be started only when the hood is

closed.

Stopping the milling process

• Press the stop button O.

• Pressing once interrupts the milling process, for example in

order to assess the milled material. The milling time still

remaining is still visible in the display N. By repressing the

start button the mill continues to run until the milling time

has completely elapsed.

• Pressing the stop button twice stops the milling process. The

machine is now in the stand-by mode.

• Pressing the start button reactivates the display and the

milling time is reset to the last starting value.

During the milling process the time can be adjusted by pressing

the N+ or N- button.

When the milling time has elapsed the milling process is

automatically ended. The display is reset to the last started

value.

M-

M+

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Sennheiser MM 400-X Operations Instructions Page 18