Sennheiser RS 125 Instruction Manual download pdf (Page 13)

Putting the RS 125 system into operation

왘 Adjust the volume of the headphone socket on your sound

source to a medium level. This improves the quality of cord-

less sound transmission. If necessary, check the menu

setting of your TV.

Connecting the transmitter to the mains

왘 Connect the yellow connector of the mains unit B to the

yellow socket on the transmitter.

왘 Plug the mains connector into a wall socket.

The transmitter automatically switches on and the oper-

ation indicator 7 lights up.

If there is no signal from the sound source for more than three

minutes, the transmitter automatically switches off and the

operation indicator 7 goes off.

Disconnecting the transmitter from the mains

왘 Pull the mains connector out of the wall socket.

Inserting and changing the headphones’ recharge-

able batteries

Before using the RS 125 for the first time, you have to insert

the supplied rechargeable batteries.

왘 Lift the left earpad 5 off as described in the chapter

“Replacing the earpads” on page 17.

With most TVs, the headphone socket is located at the

front or sides.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Sennheiser RS 125 Instruction Manual Page 13