Sennheiser SKP 2000 FREQUENCY SHEETS Instruction Manual download pdf (Page 13)

Putting the devices into operation

SK 100 G3 bodypack transmitter

Inserting the batteries/accupack/Charging the accupack

The procedure is the same as for the EK 100 G3 diversity receiver:

To insert the batteries/accupack:

# Read the chapter “Inserting the batteries/accupack” on page 10.

To charge the accupack:

# Read the chapter “Charging the accupack” on page 10.

Connecting the microphone cable/line cable

The audio input is designed for the connection of condenser microphones. DC powering of the

condenser microphones is via the audio input MIC/LINE ! (3.5 mm jack socket).

# Use one of the recommended Sennheiser microphones or the optional CL 2 line cable.

# Connect the 3.5 mm jack plug 7 from the Sennheiser cable to the 3.5 mm jack socket

MIC/LINE !.

# Lock the 3.5 mm jack plug by screwing down the coupling ring 8 of the cable.

# Via the operating menu, adjust the sensitivity of the microphone/line input.

Attaching and positioning the corresponding microphones

ME 2/ME 4

# Use the microphone clip 9 to attach the microphone to clothing (e.g. tie, lapel).

The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional

pick-up pattern. It is therefore not necessary to position it precisely.

# Attach the ME 2 microphone as close as possible to the sound source.

The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up

pattern.

# Position the ME 4 microphone so that its sound inlet is directed towards the sound source

(e.g. mouth).

ew 100 P G3 Set _529660_0309_Sp9.book Seite 12 Mittwoch, 8. April 2009 6:57 18

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 36 37

No comments

Sennheiser SKP 2000 FREQUENCY SHEETS Instruction Manual Page 13