Sennheiser 5200-II User Manual download pdf (Page 28)

Adjustment tips for the operating menu

Loading the factory-preset default settings –

“RESET”

Via the “RESET” menu, you can load the factory-preset default settings.

After the reset, the standard display is shown on the display panel.

Activating/deactivating the automatic

lock mode – “LOCK”

The radio microphone has an autolock function (automatic lock mode)

that can be activated or deactivated via the “LOCK” menu. When the

autolock function is activated,

the lock mode is automatically activated

10 seconds after pressing the last button. The lock mode protects the radio

microphone from accidental programming. For daily use, we would

recommend activating the autolock function.

Function Setting

Low-cut frequency “FLAT”

Microphone sensitivity “–20 dB“

Name “5200“

Standard display frequency

Autolock function deactivated

Channel “FIX 01“

Output power “PWR.HI”

Frequencies in the channel bank “VAR” are reset

 In the selection mode of the “Lock” menu,

press the multi-function switch  (switch

position  SET).

The current setting of the autolock function

is displayed.

 Change the setting by sliding the multi-

function switch  to the position  (UP) or

 (DOWN).

Select “LOC.ON” to activate the autolock

function or select “LOC.OFF” to deactivate

the autolock function.

 Store your setting.

SET

DOWN



1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 36 37

No comments

Sennheiser 5200-II User Manual Page 28