Sennheiser D1 User Manual download pdf (Page 5)

Operating a delegate unit

4 | ADN C1/ADN D1

Operating a delegate unit

Taking the floor/Making a request to speak

If the conference mode is set to “Direct Access” or “Override” (for fur-

ther information, refer to the detailed instruction manual for the over-

all system “ADN Conference System”):

왘 Press the microphone key .

Your microphone switches on and you can take the floor immedi-

ately. The microphone LED  and the signal light ring  light up

red. The loudspeaker  is muted. Depending on the conference

mode and the speaker limit set, the microphone of the previous

speaker will be deactivated.

If the conference mode is set to “Push To Talk”:

왘 Press the microphone key  and keep it pressed for the duration

of your contribution.

Your microphone switches on and you can take the floor immedi-

ately. The microphone LED  and the signal light ring  light up

red. The loudspeaker  is muted.

If the conference mode is set to “Request”, you have to be granted

speaking privileges:

왘 Press the microphone key .

Depending on the setting adjusted in the operating menu (for fur-

ther information, refer to the detailed instruction manual for the

overall system “ADN Conference System”)

– the microphone LED  flashes green and the signal light ring 

flashes red or

– only the microphone LED  flashes green.

When the chairperson grants you speaking privileges, your micro-

phone is activated. The microphone LED  and the signal light

ring  light up red. The loudspeaker  muted. Depending on the

conference mode and the speaker limit set, the microphone of the

previous speaker will be deactivated.







KA_ADN-DUs_xxxxxx_0911_SP13.book Seite 4 Mittwoch, 31. August 2011 1:32 13

1 2 3 4 5 6 7 8 9 10

No comments

Sennheiser D1 User Manual Page 5