Sennheiser EM 300 Specifications Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
60
To mount two EM 300 G2 into a rack:
Place the two receivers side by side onto a flat
surface, their bottom sides facing upwards.
Align the connecting plate over the holes in the
bottom sides of the receivers.
Secure the connecting plate to the receivers
using eight of the supplied recessed head screws
(M 3x6).
Hook the two rack mount “ears” to the front
panels of the receivers.
Secure the rack mount “ears” to the receivers using
two of the supplied recessed head screws (M 3x6)
respectively.
Slide the receivers into a 19” rack.
Screw the rack mount “ears” tight.
When mounting only one receiver into a rack, use the
connecting bar instead of the second receiver.
Hook the two rack mount “ears” to the front
panel of the receiver.
Secure the rack mount “ears” to the receiver using
two of the supplied recessed head screws (M 3x6)
respectively.
Secure the connecting bar to one of the rack
mount “ears” using two of the supplied recessed
head screws (M 6x10).
If you are not front mounting the antennas, insert
the two covering plugs into the antenna holes of
the connecting bar.
Slide the receiver into a 19” rack and screw the rack
mount “ears” tight.
To mount the receiver’s antenna connection to the
front of the GA 2 rack adapter using the AM 2 antenna
mount:
Screw the two BNC sockets ! of the BNC extension
cables to the connecting bar using the supplied
plain washers and nuts.
Connect the two BNC connectors " to the BNC
sockets and at the rear of the receiver.
Slide the receiver into a 19” rack.
Screw the rack mount “ears” tight.
Connect the two telescopic antennas to the two
BNC sockets !.
Pull the telescopic antennas out and align them
upwards in a V-shape.
!
"
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments