Sennheiser EvolutionWireless EW 300 Series User Manual download pdf (Page 15)

Putting the devices into operation

Connecting an amplifier/mixing console

The receiver’s ¼” (6.3 mm) jack socket  and the XLR-3M socket  are connected in parallel.

 Use a suitable cable to connect the amplifier and/or the mixing console to the ¼”

(6.3 mm) jack socket  and/or the XLR-3M socket .

 Via the operating menu, adjust the audio output level (“AF Out”) of the receiver to the

input of the amplifier or mixing console (see page 26). The audio output level is adjusted

via the operating menu and is common for both sockets.

Connecting receivers in a network

You can connect several receivers in a network. To do so, use the LAN socket . The receivers

are remote controlled via a PC running the supplied “Wireless Systems Manager” (WSM) soft-

ware. For information on network operation, refer to the instruction manual of the EM 300

receiver available on the ew G3 product page at www.sennheiser.com.

Connecting the mains unit

Only use the supplied mains unit. It is designed for the receiver and ensures safe operation.

To connect the mains unit:

 Insert the yellow connector of the NT 2-3 mains unit  into the yellow socket  of the

receiver.

 Pass the cable of the mains unit through the cable grip .

 Slide the supplied country adapter  onto the mains unit .

 Plug the mains unit  into a wall socket.

The STANDBY button is backlit in red.



WSM









1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

No comments

Sennheiser EvolutionWireless EW 300 Series User Manual Page 15