Sennheiser ew500 User Manual download pdf (Page 77)

SenSit

Selecting a frequency memory – selecting the frequency,

channel number, name (EM 500 only)

씰 With the / buttons you can directly switch between the factory-

preset fixed frequency memories (presets). The display starts flashing.

Your selection becomes effective immediately.

씰 Press the SET button to acknowledge your selection. The display stops

flashing. (If the SET button is not pressed, the receiver will store the

new frequency automatically on switch-off).

Note:

You can choose the content of the standard display i.e. whether the

frequency, the channel number or a name is displayed (the latter option

is only possible with the EM 500 receiver) ( “Selecting the content

of the standard display”). The receiver is factory-preset to show the

frequency setting as standard.

Adjusting the sensitvity (transmitters only)

Close talking distances, speakers with loud voices or loud music sequences

may cause overmodulation in the transmission link, resulting in distortion.

In this case, the “PEAK” warning of the EM 500’s AF level display (as well as

the SK 500 transmitter’s yellow audio peak indication LED) will light up. If,

on the other hand, the sensitivity is adjusted too low, the transmission link

will be undermodulated, which would result in a signal with high background

noise.

The sensitivity has to be adjusted such that the “PEAK” warning of the

receiver’s AF level display only lights up during the loudest passages.

The following figures are a guide to the best settings:

Loud music/vocals: –30 / –20 dB

Presentations: –20 / –10 dB

Interviews: –10 / 0 dB

씰 Select the “SEnSit” menu by pressing the SET button until “SEnSit”

appears on the display; after a short pause the current input sensitivity

setting is displayed.

씰 With the / buttons you can now select a different setting. The

sensitivity can be adjusted in 10-dB steps from 0 to –30 dB. The new

setting starts flashing on the display and becomes effective immediately.

씰 Press the SET button to return to the top menu level. The display

then switches back to the standard display.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 203 204

No comments

Sennheiser ew500 User Manual Page 77