Sennheiser K 6 P Service Manual download pdf (Page 4)

K6 / K6 P Powering modules

The K6 and K6P powering modules power the various microphone heads of the

K6 modular microphone system and provide them with a balanced microphone

level output. The powering module is also the microphone body for the different

heads. Please refer to the enclosed system overview for possible combinations.

Versions

K6 Powering module for battery or phantom powering. Switchable bass

roll-off filter, on/off switch with battery condition indicator.

K6 P Powering module for phantom powering only. Switchable bass roll-off

filter, on/off switch.

...-C Versions supplied without accessories.

K6-CL Identical to K6, but with lower sensitivity.

Battery operation (K6 only)

• Insert a 1.5V AA (LR6) size battery (taking care to observe the correct

polarity) into the powering module and screw on a microphone head.

• Switch the microphone on, checking the battery condition (the LED will blink

as the powering module is switched on). If the LED is bright, the battery

capacity is OK, if it is dim, the battery is low and should be replaced.

• When the powering module is connected to a phantom power

source, it automatically switches from battery to phantom power

operation, thus conserving the battery.

Phantom power operation (K6 and K6P)

Both the K6 and K6P powering modules can be powered by 12-48V DC

phantom power via the connection cable (phantom powering).

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

Sennheiser K 6 P Service Manual Page 4