6 | MKH 8070
Putting the MKH 8070 into operation
Putting the MKH 8070 into operation
Connecting the microphone
Connection data of the MKH 8070:
• 48 V ± 4 V phantom powering (P48, as per IEC 61938)
• XLR-3 connector, balanced
To connect the MKH 8070 to a mixing console or recording device:
왘 Connect the socket of the microphone cable to the microphone.
왘 Connect the connector of the microphone cable to the mixing console or
recording device.
Attaching the microphone
왘 Select the suitable mounting thread:
– Without thread insert: 5/8” thread
– Thread insert: 3/8” thread
왘 Screw the microphone clamp 4 to a stand.
왘 Place the microphone with its back end into the microphone clamp: Make sure
that the lateral slots are not covered.
왘 Orient the microphone together with the microphone clamp and fix them by
screwing the wing screw tight.
Comments to this Manuals