Sennheiser Set 830 S-MKE Instruction Manual download pdf (Page 32)

Additional technical information

Changing the operating mode

The transmitter can be set to a different operating mode. This is useful

when the sound of your sound source is very low and the transmitter

therefore does not always switch on automatically.

Particularities of operating mode 2:

In operating mode 2, the transmitter is not switched on by the sound

signal from the sound source.

To switch the transmitter on:

왘 Take the receiver out of the charging compartment.

To switch the transmitter off:

왘 Place the receiver into the charging compartment.

If – in operating mode 2 – you want to use a second receiver and charge

its rechargeable battery during operation:

왘 Press the “speech intelligibility” button

for approx. 5 seconds.

The indicator

D goes off. The charging indi-

cator for the spare rechargeable battery

flashes several times:

red: operating mode 2

green: operating mode 1 (factory-preset)

If the operating mode was changed success-

fully, the charging indicator for the spare

rechargeable battery

0 goes off and the

indicator

D lights up again.

왘 Pull the battery out of the receiver’s battery

compartment

왘 Slide the battery into the transmitter’s

charging compartment

9 as far as it will go.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Sennheiser Set 830 S-MKE Instruction Manual Page 32