Sennheiser SK 50 - 04-05 Specifications download pdf (Page 48)

DISPLY Selecting the standard display

Via the “DISPLY” menu, you can select the standard display:

NAME Entering a name

Via the “NAME” menu, you can enter a freely selectable name for

the transmitter. The name can be displayed on the standard display

and can consist of up to six characters such as:

y letters (without pronounciation marks),

y numbers from 0 to 9,

y special characters e.g. () - . _ and spaces.

To enter a name, proceed as follows:

After you have entered into the setting mode of the menu, the first

segment starts flashing on the display.

 With the / buttons you can now select a character. By briefly

pressing a button, the display jumps either forwards or

backwards to the next character. If you hold down a button, the

display starts cycling continuously.

 Press the SET button to change to the next segment and select

the next character.

 Have you entered the name completely? Press the SET button to

store your setting and to return to the top menu level.

RESET Loading the factory-preset default settings

Via the “RESET” menu, you can load the factory-preset default

settings. Only the selected setting for the pilot tone remains

unchanged. After the reset, the transmitter is restarted and the

standard display is shown on the display panel.

Selectable

standard display

Contents of standard

display

“FREQ“

“NAME“

“CHAN“

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 61 62

No comments

Sennheiser SK 50 - 04-05 Specifications Page 48