Sennheiser SKP 30 Instruction Manual download pdf (Page 23)

Assigning a channel number (Ch no)

You can now assign each frequency memory a channel number

(from 0 to 255). With larger systems, we recommend using the same

channel numbers for both transmitters and receivers in order to

provide for simpler monitoring of the system.

 Select the frequency memory for which you wish to assign a

channel number ( “15 Selecting a frequency memory – selec-

ting a frequency and channel number”, page 48).

 Select the “Ch no” menu by pressing the SET button until “Ch no”

appears on the display; after a short pause the currently assigned

channel number is displayed.

 With the / buttons you can now select a different channel

number. The new channel number starts ﬂashing on the display

and becomes effective immediately.

Note:

Channel numbers which have already been assigned to a fixed

frequency memory are skipped!

 Press the SET button to return to the top menu level. The display

then switches back to the standard display.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Sennheiser SKP 30 Instruction Manual Page 23