Sennheiser EM 3532-U Service Manual download pdf (Page 13)

9 Basic functions of the Sennheiser operating menu

A special feature of the Sennheiser 3000 series is the similar operation of transmitters and receivers.

In stressfull situations, for example on stage or during a live show or presentation, it is important

that the receiver is easy to operate and that adjustments to the receiver settings can be made

quickly and “without looking”. Therefore, the necessary operating steps for each device must be

similar.

 Press the / buttons to select a menu:

By briefly pressing the / buttons, you can jump either forwards or backwards to the

next menu. Your selection is indicated by the corresponding LC dot on the right of the

display panel .

 Press the SET button to get into the setting mode:

If you now press the SET button, the corresponding display on the display panel begins to

flash, indicating that you are in the setting mode of the selected menu.

 Press the / buttons to adjust the settings of the selected menu.

 Press the SET button to store the setting:

To store a setting, press the SET button until “Sto” briefly appears on the display, indicating

that your setting has been stored. The display then switches back to the standard display.

Important: Only now is your setting stored!

씰 If you do not press the / buttons or the SET button for more than 30 seconds, the

setting mode is automatically left and the display switches back to the standard display.

You can discontinue your preselection by briefly (!) pressing the SET button. The display

briefly indicates “ESC” and then switches back to the standard display.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

No comments

Sennheiser EM 3532-U Service Manual Page 13