Sennheiser EK 300 IEM Specifications download pdf (Page 12)

To mount two transmitters into a rack:

 Place the two transmitters side by side onto a flat

surface, their bottom sides facing upwards.

 Align the connecting plate $ over the holes in the

bottom sides of the transmitters.

 Secure the connecting plate $ using eight of the

supplied recessed head screws (M 3x6).

 Hook the two rack mount “ears” " to the front panels

of the transmitters.

 Secure the rack mount “ears” to the transmitters

using two of the supplied recessed head screws

(M 3x6) respectively.

 Slide the transmitters into the 19” rack.

 Secure the rack mount “ears” to the rack.

When mounting only one transmitter into a rack, use the

connecting bar # instead of the second transmitter.

 Hook the two rack mount “ears” " to the front panels

of the transmitter.

 Secure the rack mount “ears” to the transmitter using

two of the supplied recessed head screws (M 3x6)

respectively.

 Secure the connecting bar # to one of the rack mount

“ears” " using two of the supplied recessed head

screws (M 6x10).

 If you are not front mounting the antennas, insert the

two covering plugs % into the antenna holes of the

connecting bar.

 Slide the transmitter into the 19” rack.

 Secure the rack mount “ears” to the rack.

To mount the transmitter’s antenna connection to the

front of the GA 2 rack adapter using the AM 2 antenna

mount:

 Screw the BNC socket & of the BNC extension cables

to the connecting bar # using the supplied plain

washer and nut.

 Connect the BNC connector ' to the BNC socket  at

the rear of the transmitter.

 Slide the transmitter into the 19” rack.

 Secure the rack mount “ears” to the rack.

 Connect the telescopic antenna  to the BNC

socket &.

 Pull the end cap to extend the telescopic antenna.



1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

No comments

Sennheiser EK 300 IEM Specifications Page 12