Sennheiser SK 5212 User Manual download pdf (Page 22)

Adjustment tips for the operating menu

Selecting a channel – CHAN

Via the “CHAN” menu, you can switch between the channels in the channel

banks “FIX“ and “VAR“. The transmitter is not transmitting while this

adjustment is being made.

When changing to the setting mode of the “CHAN” menu, the current

channel number appears on the diplay. After approx. 1 second, the

currently assigned transmission frequency is displayed.

 To select a different channel, slide the multi-function switch  to the

position

 (UP) or  (DOWN). The new channel number appears on the

display panel for approx. 1 second and then the currently assigned

transmission frequency is displayed.

Only after the new setting has been stored (“STORED” has appeared on

the LC display panel) does the transmitter operate on the transmission

frequency of the new channel.

Note:

The frequencies in the channel bank “FIX” can only be changed by a

Sennheiser Service Partner. If you require a special frequency set in this

bank, please contact your local Sennheiser Service Partner.

Selecting the frequencies to be stored in the channel

bank “VAR” –

TUNE

Via the “TUNE” menu, you can freely select the frequencies to be stored in

the channel bank “VAR” (variable bank). The transmitter is not transmit

ting while this adjustment is being made.

Note:

When you have selected the channel bank “FIX” and then select the

“TUNE” menu, the transmitter automatically switches to channel 01 of

the channel bank “VAR” and “VAR” briefly appears on the LC display

panel

.

1 sec.

MHz

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

No comments

Sennheiser SK 5212 User Manual Page 22