Sennheiser SR 3254 User Manual download pdf (Page 22)

TUNE Selecting the frequencies to be stored in the

channel bank “U”

Via the “TUNE” menu, you can freely select the frequencies to

be stored in the channel bank “U” (user bank).

왘 Press the 왖/왔 buttons to select the “TUNE” menu. The LC

dot “TUNE”  lights up.

왘 Press the SET button to get into the setting mode of the

“TUNE” menu.

The LC dot “TUNE”  and the “FREQUENCY MHZ” display 

start flashing.

Note

When pressing the SET button for one second, you can use

the 왖/왔 buttons to select a different channel for which you

can then change the frequency.

When you have selected the channel bank “F” and then select

the “TUNE” menu, the transmitter automatically switches to

channel 01 of the channel bank “U” and “U.01” appears on the

display. Otherwise, the current channel of the channel bank “U”

is displayed.

왘 Press the 왖/왔 buttons to select the desired transmission

frequency. Transmission frequencies are tunable in 5-kHz

steps within a switching bandwidth of 36 MHz max.

왘 Press the SET button to store your selection. “Sto.” briefly

appears on the display. While the transmitter changes to the

new frequency, it is muted.



1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

No comments

Sennheiser SR 3254 User Manual Page 22