Sennheiser SK 500 G2 - 02-06 Specifications download pdf (Page 23)

Entering a name

Name

Via the “Name” menu, you can enter a freely selectable name for the receiver.

You can, for example, enter the name of the performer for whom the

adjustments have been made.

The name can be displayed on the standard display and can consist of up to

ten characters such as:

y letters (without pronounciation marks),

y numbers from 0 to 9,

y special characters e.g. () - . _ and spaces.

To enter a name, proceed as follows:

 Press the SET button to get into the setting mode of the “Name” menu.

The first segment starts flashing on the display.

 With the / buttons you can now select a character. By briefly pressing

a button, the display jumps either forwards or backwards to the next

character. If you hold down a button, the display starts cycling

continuously.

 Press the SET button to change to the next segment and select the next

character.

 Have you entered the name completely? Press the SET button to store

your setting and to return to the top menu level.

Loading the factory-preset default settings

Reset

Via the “Reset” menu, you can load the factory-preset default settings. Only

the selected setting for the pilot tone remains unchanged. After the reset, the

receiver is restarted and the standard display is shown on the display panel.

Activating/deactivating the pilot tone evaluation

Pilot

Via the “Pilot” menu, you can activate or deactivate the pilot tone evaluation.

The pilot tone supports the receiver’s squelch function (Squelch) and protects

against interference due to RF signals from other units. The transmitter adds

an inaudible signal, known as the pilot tone, to the transmitted signal. The

receiver detects and evaluates the pilot tone, and is thus able to identify the

signal of the matching transmitter and mute all others.

Transmitters of the ew 500 series (first generation) do not transmit a pilot

tone and the receivers of the ew 500 series (first generation) cannot

evaluate the pilot tone. Nevertheless, you can combine the EM 500 G2

receiver with a transmitter of the first generation. However, when combining

units, please observe the following:

y With an ew 500 G2 transmitter and the ew 500 G2 receiver:

Activate the pilot tone function with both transmitter and receiver.

y With an ew 500 transmitter and the ew 500 G2 receiver or vice versa:

Deactivate the pilot tone function with the ew 500 G2 transmitter or receiver.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

No comments

Sennheiser SK 500 G2 - 02-06 Specifications Page 23