Sennheiser SKP 30 User Manual download pdf (Page 56)

22 Error checklist

Problem Possible cause

No operation indication

 Battery is flat

No RF signal

 Transmission frequency is not the same

as the receivng frequency

 Transmitter is out of range

RF signal available but

 Transmitter is muted (“MUTE”)

no audio signal

 Receiver’s squelch threshold adjusted

too high

 Transmitter does not supply phantom

powering to condenser microphone

( “18 Switching the phantom

powering on/off (PHAnto)”, page 51)

Audio signal noisy

 Transmitter sensitivity adjusted too

low

 Receiver’s AF output level adjusted too

low

Audio signal distorted

 Transmitter sensitivity adjusted too

high

 Receiver’s AF output level adjusted too

high

 If problems occur that are not listed in the above table, please

contact your local Sennheiser agent for assistance.

1 2 ... 51 52 53 54 55 56 57 58 59 60

No comments

Sennheiser SKP 30 User Manual Page 56