Sennheiser WICOS BA Instruction Manual download pdf (Page 25)

Putting the conference system into operation

왘 Connect the network cable to your computer or network.

왘 Call up the web server (see page 45).

Connecting a system cable for integrated operation

To integrate the WiCOS conference system into a wired SDC 8200

conference and interpretation system:

왘 Connect a system cable (Sennheiser SDC CBL RJ45, see “Accessories

and spare parts” on page 83) to the IN system socket (RJ 45) j.

왘 Connect the system cable to one of the six RJ 45 sockets (“PORT 1-6”)

of the SDC

8200 CU-M or SDC 8200 CU central unit (see page 70 and

the instruction manual of the SDC 8200 conference and interpretation

system).

Setting up the access point

왘 If possible, set up the devices so that there is a “free line of sight”

between the conference units and the access point.

To obtain the optimum transmission range:

왘 Place the access point as centrally and as high as possible.

SDC 8200 CU

Accesspoint

WiCOS AP

PORT 1-6

CAUTION! Danger of intermodulation!

If you set up the individual components of the conference

system too close to one another, intermodulation can occur.

왘 Observe a minimum distance of 1.5 m between the access

point and the conference units.

왘 Observe a minimum distance of 50 cm between the

conference units.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 91 92

No comments

Sennheiser WICOS BA Instruction Manual Page 25