Sennheiser EK3253 Specifications download pdf (Page 22)

Adjustment tips for the operating

Selecting a channel – CHAN

Via the “CHAN” menu, you can switch between the channels in the

channel banks “F” (fixed bank) or “U” (user bank). The channel

bank “F“ has up to 16 switchable channels that are factory-preset

to customer-specific receiving frequencies. These frequencies

cannot be changed.

The channel bank “U” also has up to 16 switchable channels to store

frequencies that are freely selectable within the preset frequency

range.

Always set the transmitter and the receiver of a transmission link to

the same channel. After scanning the channel bank (

see “Scanning

the channel bank for free channels – SCAN” on page 25), only the

free channels are displayed. Set the transmitter to one of the free

channels.

Selecting the frequencies to be stored in the

channel bank “U” – TUNE

Via the “TUNE” menu, you can freely select the frequencies to be

stored in the channel bank “U” (user bank).

 Press the SET button to get into the setting mode of the “TUNE”

menu.

Note:

When pressing the SET button for one second, you can use the

/ rocker button to select a different channel for which you

can then change the frequency.

When you have selected the channel bank “F” and then select the

“TUNE” menu, the receiver automatically switches to channel 01 of

the channel bank “U”

 Press the / rocker button to select the desired receiving

frequency. Receiving frequencies are tunable in 5-kHz steps

within a switching bandwidth of 36 MHz max.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Sennheiser EK3253 Specifications Page 22