Sennheiser EK3253 Specifications download pdf (Page 29)

If problems occur ...

Error checklist

If problems occur that are not listed in the above table or if the

problems cannot be solved with the proposed solutions, please

contact your local Sennheiser agent for assistance.

Problem Possible cause Possible solution

operation

indication

Batteries are flat or

accupack is flat

Replace the batteries

or recharge the

accupack

No RF signal Transmitter and

receiver are not on the

same channel

Set transmitter and

receiver to the same

channel

Transmitter is out of

range

Check the squelch

threshold setting

or change the position

of the transmitting

antenna

RF signal

available,

no audio

signal,

“MUTE”

display

appears on

the display

panel

Receiver’s squelch

threshold is adjusted

too high

See “Adjusting the

squelch threshold –

SQELCH” on page 25

Transmitter does not

transmit a pilot tone

Set the transmitter to

stereo operation or

deactivate the pilot

tone evaluation on the

receiver

No access to

a certain

channel

During scanning, an RF

signal has been

detected on this

channel and the

channel has been

locked

See “Scanning the

channel bank for free

channels – SCAN” on

page 25

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Sennheiser EK3253 Specifications Page 29

Comments to this Manuals

Related products and manuals for AV receivers Sennheiser EK3253