Sennheiser SYSTEM 2015 Specifications download pdf (Page 30)

Adjustment tips for the operating menu of the

transmitter

Adjusting the microphone sensitivity

SENSIT (MIC)

Via the “

SENSIT

(MIC)” menu, you can adjust the sensitivity of the con-

nected microphone in 32 steps. The microphone sensitivity is correct

adjusted when the display for microphone level (MIC)



shows full deflec-

tion only when you speak very loudly. The yellow LED



should only light

up briefly.

Note:

For monitoring the adjusted microphone sensitivity, the display for

microphone level (MIC)



is always indicated – even when the micro-

phone is muted.

Adjusting the sensitivity of the line input

SENSIT (LINE)

Via the “

SENSIT

(LINE)” menu, you can adjust the sensitivity of the line

input in 32 steps.

The input sensitivity is adjusted too high when loud passages cause over-

modulation in the transmission link. In this case, the yellow LED



will light

up for longer periods of time. If, on the other hand, the sensitivity is

adjusted too low, the transmission link will be undermodulated, which

would result in a signal with high background noise.

The sensitivity is correctly adjusted when the display for line level (LINE)



shows full deflection only during the loudest passages.

Note:

If the sensitivity of the line input is set to “OFF”, the display for line level

(LINE)



is not shown on the display panel.







1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

Comments to this Manuals

No comments

Sennheiser SYSTEM 2015 Specifications Page 30

Comments to this Manuals

Related products and manuals for FM transmitters Sennheiser SYSTEM 2015