Sennheiser 500 Series User Manual download pdf (Page 21)

Using the devices

SK 500 bodypack transmitter

To switch the bodypack transmitter on (online operation):

 Push the two catches 

and open the battery compartment cover .

To switch the bodypack transmitter off:

 If necessary, deactivate the lock mode (see page 22).

To switch the bodypack transmitter on and to deactivate the RF signal on switch-on (offline

operation):

 Briefly press the ON/OFF button .

The bodypack transmitter transmits an RF signal. The transmission icon  is

displayed.

The red ON LED  lights up and the standard display “Frequency/Name”

appears on the display panel.

You can switch the bodypack transmitter on and deactivate the RF signal on switch-

on. For more information, see below.

 Press the ON/OFF button  until “OFF” appears on the display panel. The red

ON LED  goes off and the display panel turns off.

When in the operating menu, pressing the ON/OFF button  will cancel your entry

(ESC function) and return you to the current standard display.

 Press the ON/OFF button  until “RF Mute On?” appears on the display panel.

 Press the SET button .

The transmission frequency is displayed but the bodypack transmitter does not

transmit an RF signal. The transmission icon 

is not displayed

. When

the pilot

tone function is activated on both bodypack transmitter and receiver

, “RF Mute”

appears on the receiver’s display panel.











ON/OFF

SET

MHz

543.200

ew500 G3

MUTE



1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

No comments

Sennheiser 500 Series User Manual Page 21