Sennheiser EM 550 G2 - 02-06 Specifications download pdf (Page 11)

Essential notes on mounting remote antennas:

y Position antennas in the same room in which the transmission takes place!

y Maintain a minimum distance of 50 cm from metal objects (including

reinforced-concrete walls)!

y Maintain a minimum distance of 1 m between receiving antennas!

Daisy-chaining up to eight twin receivers

The twin receivers feature an integrated antenna splitter so that up to eight

twin receivers can be daisy-chained without any additional antenna splitters

being required. Only daisy-chain receivers which operate in the same

frequency range (see “The channel bank system” on page 4).

 Connect the two supplied telescopic antennas or two remote antennas

(optional accessories) to the BNC sockets  and  at the rear of the first

twin receiver.

 Use BNC cables to daisy-chain the twin receivers as shown in the diagram

on the left.

Note:

To supply an active directional antenna, a direct voltage (which cannot be

switched off) is output via the BNC sockets  and  of the twin receivers.

For optimum reception quality, we recommend limiting the number of

daisy-chained twin receivers to 8.

Connecting the mains cable

Use the mains cable to connect the twin receiver to the mains

(90–264 V AC, 50–60 Hz).

 Pass the mains cable through the cable grip .

 Plug the mains cable into socket .









1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

No comments

Sennheiser EM 550 G2 - 02-06 Specifications Page 11