Sennheiser 300 IEM - 12-03 Specifications download pdf (Page 71)

Recommendations and tips

... for the EK 300 IEM G2 receiver

y The antenna of the EK 300 IEM G2 should hang freely and be at least 1 cm

away from the body. The antenna must not be in direct contact with the

skin.

... for optimum reception

y Transmission range depends to a large extent on location and can vary

from about 10 m to about 150 m. There should be a “free line of sight”

between transmitting and receiving antennas.

y If, with the SR 300 IEM G2 transmitter, transmission conditions are

unfavourable, you should use a remote antenna which is connected via

antenna cable.

y To avoid overmodulating the receiver, observe a minimum distance of 5 m

between transmitting and receiving antennas.

y Observe a minimum distance of 50 cm between transmitting antennas and

metal objects (such as cross members or reinforced-concrete walls).

... for multi-channel operation

y For multi-channel operation, you can only use the channels in a channel

bank. Each of the channel banks “1” to “8” accommodates up to 12

factory-preset frequencies which are intermodulation-free. For alternative

frequency combinations, please refer to the enclosed frequency table. The

freely selectable frequencies can be selected via the “Tune” menu and can

be stored in the channel bank “U”.

y When using several transmitters simultaneously, interference can be

avoided by maintaining a minimum distance of 20 cm between two

transmitters. For multi-channel applications, use the AC 2 transmitter

combiner (see “Accessories” on page 73).

Care and maintenance

Use a slightly damp cloth to clean the units from time to time.

Note:

Do not use any cleansing agents or solvents.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 159 160

No comments

Sennheiser 300 IEM - 12-03 Specifications Page 71