Sennheiser EM 3532-U Service Manual download pdf (Page 11)

7 Selecting the mains voltage

Before you plug the mains connector into the mains, please check first of all

that the receiver is set to the correct mains voltage!

You can change the mains voltage by removing the fuse holder

 with the inserted fuse ,

turning it through 180°

 and inserting it again . The set voltage can be seen at the top of the

fuse holder.

Mains connection

Insert the supplied mains cable into socket  on the receiver and pass the cable through the cable

grip .

Because of the cable grip, the cable cannot slip out of socket

 and interrupt operation.

Note

A cable grip is particularly important when the receiver is permanently rack

mounted. Inside the rack there are often a large number of cables - a cable grip

prevents the cables from pulling each other out.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

No comments

Sennheiser EM 3532-U Service Manual Page 11