100 SeriesInstruction manual
Product overview8Overview of the displays of the SK 100 bodypack transmitterAfter switch-on, the bodypack transmitter displays the standard display “F
Product overview9Overview of the SKM 100 radio microphoneOperating elements쐃 Microphone head (interchangeable)쐇 Name and pick-up pattern of the micro-
Product overview10Overview of the displays of the SKM 100 radio microphoneAfter switch-on, the radio microphone displays the standard display “Frequen
Putting the devices into operation11Putting the devices into operationEM 100 receiverSetting up the receiver on a flat surfacePlace the receiver on a
Putting the devices into operation12Stacking receivers Stack several receivers on top of each other.Connecting the rodantennasThe supplied rod anten
Putting the devices into operation13Connecting the mains unitOnly use the supplied mains unit. It is designed for the receiver and ensures safe operat
Putting the devices into operation14Charging the accupackTo charge the BA 2015 accupack: Insert the bodypack transmitter into the L 2015 charger (opt
Putting the devices into operation15To detach the belt clip: Lift one side of the belt clip as shown in the diagram on the right-hand side. Press do
Putting the devices into operation16Charging the accupackTo charge the radio microphone with the inserted BA 2015 accupack (optional accessory): Use
Using the devices17Using the devicesTo establish a transmission link, proceed as follows:1. Switch the receiver on.2. Switch a transmitter on.The tran
Using the devices18To completely switch the receiver off: Disconnect the receiver from the mains by unplugging the mains unit from the wallsocket.SK
Using the devices19To activate the RF signal:SKM 100 radio microphoneTo switch the radio microphone on (online operation):To switch the radio micropho
Using the devices20To switch the radio microphone on and to deactivate the RF signal on switch-on (offlineoperation):To activate the RF signal:Synchro
Using the devices21“ ” appears on the display panel of the receiver. “ ” also appears if:– no transmitter was found or the transmitter is not compatib
Using the devices22Muting the audio signal or deactivating the RF signalEM 100To mute the audio signal:To unmute the audio signal:SK 100The MUTE switc
Using the devices23The current state of the muting function or the RF signal is displayed on the display panel ofthe bodypack transmitter.SKM 100You c
Using the devices24Selecting a standard displayEM 100SK 100 and SKM 100To select a standard display: Press the UP/DOWN button to select a standard di
Overview of the operating menus25Overview of the operating menusEM 100When one of the standard displays is shown on the display panel, you can get int
Overview of the operating menus26SK 100 and SKM 100Easy Setup Scans for unused frequency presets, releases and selects frequency presetsFrequency Pres
Cleaning the devices27Cleaning the devicesEM 100 Before cleaning, disconnect the device from the mains. Use a slightly damp cloth to clean the rece
Contents1ContentsImportant safety instructions ...
Cleaning the devices28To clean the radio microphone’s sound inlet basket (MMD 835-1, MMD 845-1, MMD 935-1,MMD 945-1, MME 865-1): Unscrew the upper so
Cleaning the devices29SK 100 and SKM 100RF signal available, no audio signal, “MUTE” appears on the display panelTransmitter is muted (“MUTE”)or trans
Cleaning the devices30If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,please
Specifications31SpecificationsEM 100RF characteristicsModulation wideband FMReceiving frequency ranges 516–558, 566–608, 626–668, 734–776, 780–822, 82
Specifications32In compliance with (EM)Approved byIn compliance with Certified by cCSAus KL, 60065, CSA.SK 100 and SKM 100Europe:USA:EMC EN 301489-1/-
Specifications33In compliance with (SK and SKM)Approved by (SK)Approved by (SKM)AF characteristicsCompander system Sennheiser HDXAF frequency response
Specifications34Microphones (SK 100)Microphone heads (SKM 100)Polar diagrams and frequency response curves of the microphone heads (SKM 100)ME 2 ME 3
Manufacturer Declarations35Manufacturer DeclarationsWarrantySennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product.For
Manufacturer Declarations36Statements regarding FCC and Industry Canada These devices comply with Part 15 of the FCC Rules and with RSS-210 of Industr
Important safety instructions2Important safety instructionsSystem• Read this instruction manual.• Keep this instruction manual. Always include this in
Sennheiser electronic GmbH & Co. KGAm Labor 1, 30900 Wedemark, Germanywww.sennheiser.comPrinted in GermanyPubl. 01/09529659/A01
Important safety instructions3• Danger due to high volumes This device is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is thesound
The ew 100 G3 evolution wireless series4The ew 100 G3 evolution wireless seriesWith the ew 100 G3 evolution wireless series, Sennheiser offers high-qu
Product overview5Product overviewOverview of the EM 100 receiverAB 2 Data Ports auf der Rückseite ergänzen,Anzeigen-Display verkleinern, Jog-Dial entf
Product overview6Overview of the displays of the EM 100 receiverAfter switch-on, the receiver displays the standard display “Receiver Parameters”. For
Product overview7Overview of the SK 100 bodypack transmitterOperating elements쐃 Microphone/instrument input (MIC/LINE), 3.5 mm jack socket, lockable 쐇
Comments to this Manuals