Sennheiser WICOS BA Instruction Manual download pdf (Page 39)

Running a conference

Assigning a participant the “speaking right”

If – in “With Request” or “With Req. No Clear” mode – a participant presses

the microphone key on his conference unit, he makes a request to speak.

All participants who have made a request to speak will join a request-to-

speak list. On the conference unit, the microphone LED

0 flashes green

and the signal light ring

2 flashes red, indicating that the participant has

made a request to speak.

To assign the “speaking right” to the next participant from the request-to-

speak list using the WiCOS

C and WiCOS CV chairman units:

왘 Press the NEXT key 6.

The next participant from the request-to-speak list is assigned the

“speaking right”. As long as you keep the key

6 pressed, the LED next

to the key lights up.

Ending a discussion

Using the cancel function, the chairman can end a discussion at any time.

왘 Briefly press the priority key 5.

All conference units are muted. The request-to-speak list is not cleared.

As long as you keep the key

5 pressed, the LED next to the key lights

up.

C CV D DV

In stand-alone operation, the “speaking right” can only be

assigned using the WiCOS

CV and WiCOS C chairman units.

Conference control via the web server is not possible.

C CV D DV

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

No comments

Sennheiser WICOS BA Instruction Manual Page 39