Sennheiser EW100 G2 User Manual download pdf (Page 19)

Attaching the microphones

 Use the microphone clips ! to attach the ME 2 and ME 4 clip-on micro-

phones to clothing (e.g. tie, lapel).

 Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.

Positioning the microphones

The ME 3 and ME 4 microphones are directional microphones, i.e. their sound

inlet should always be directed towards the sound source (e.g. mouth).

The ME 2 with omni-directional pick-up pattern picks up sound equally from

all directions. It is the best choice if movements of the speaker’s head have to

be compensated for. However, it should be attached as close as possible to

the sound source.

Adjust the sensitivity correctly for all microphones/usages (see: „Adjusting

the sensitivity (transmitters only)“ on page 32).

SKP 100 G2 plug-on transmitter

Inserting and replacing the batteries

For powering the SKP 100 G2 plug-on transmitter, you can either use two

1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack.

 Slide the battery compartment cover  in the direction of the embossed

arrow and opern the cover.

 Insert the two batteries or the BA 2015 accupack as shown in the diagram

on the left. Please observe correct polarity when inserting the batteries/

accupack.

 Close the battery compartment. The battery compartment cover  locks

into place with an audible click.

Note:

For accupack operation of the transmitter, only use the BA 2015 accupack

In order to ensure optimum operational reliability. For charging the

accupack, only use the L 2015 charger. Both the accupack and the charger

are available as accessories.

The accupack is fitted with an integrated sensor which is – via a third

contact – monitored by the electronics of the transmitter and the charger.

The sensor is necessary for the following control purposes:

y The taking into account of the different voltage characteristics of

primary cells (batteries) and accupacks. The battery status indications

on the displays, the transmission of transmitter battery status

information to the rack-mount receivers and the switch-off thresholds

at the end of the operating time are corrected correspondingly. Due to

the missing sensor, individual rechargeable battery cells will not be

identified as accupacks.

y The monitoring of the accupack temperature during charging in the

L 2015 charger.



1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 46 47

No comments

Sennheiser EW100 G2 User Manual Page 19